Product overview
The wireless temperature monitoring system uses radio waves for signal transmission . The wireless temperature sensor is installed on the device being measured and is connected to the receiving host via a wireless network .
The KS30M-LORA wireless temperature measurement host is an industrial-grade wireless communication temperature measurement host with a DIN rail-mounted metal casing. Users can read data from the receiving module via RS485 or serial communication. This series of products is currently widely used in many industries such as power, petroleum, chemical, railway, mining, metallurgy, and cement.
Equipment technical parameters
|
Technical parameters
|
Technical indicators
|
|
Usage Environment
|
Ambient temperature
|
-25℃～+70℃
|
|
Ambient humidity
|
≤95%
|
|
Atmospheric pressure
|
80～110KPa
|
|
Altitude
|
≤2500 meters
|
|
Working power supply
|
Power supply
|
AC/DC 100-240V
|
|
Number of received
|
Maximum number of sensors that can be connected
|
240
|
|
Wireless frequency band
|
Sub-GHz (default 433MHz)
|
|
Communication methods
|
RS485
|
|
2-channel 485 communication output
|
|
Relay dry contact parameters
|
AC220V/5A (1 set of passive normally open/normally closed contacts)
|
|
Default communication parameters
|
Baud rate
|
9600Bps
|
|
Data bits
|
8-bit
|
|
Stop bit
|
1 bit
|
|
Verification method
|
None
|
|
Communication protocol
|
Standard MODBUS RTU protocol
|
|
Installation method
|
Guide rail installation, screw installation
|
