High-speed Power Line Communication (H-PLC)
Home / Product / High-speed Power Line Communication(HD-PLC) / High-speed Power Line Communication (H-PLC) / Single-Phase Dual-Port Broadband Powerline Transceiver
KS710LD

Single-Phase Dual-Port Broadband Powerline Transceiver

  • Single-Phase Dual-Port Broadband Powerline Transceiver
  • Single-Phase Dual-Port Broadband Powerline Transceiver
  • Single-Phase Dual-Port Broadband Powerline Transceiver
  • Single-Phase Dual-Port Broadband Powerline Transceiver
  • Single-Phase Dual-Port Broadband Powerline Transceiver
  • Single-Phase Dual-Port Broadband Powerline Transceiver
  • Single-Phase Dual-Port Broadband Powerline Transceiver
  • Single-Phase Dual-Port Broadband Powerline Transceiver
  • Single-Phase Dual-Port Broadband Powerline Transceiver
  • Single-Phase Dual-Port Broadband Powerline Transceiver
  • Single-Phase Dual-Port Broadband Powerline Transceiver
  • Single-Phase Dual-Port Broadband Powerline Transceiver

Product Introduction

Broadband carrier KSF710LD is an industrial-grade bandwidth power line carrier communication device based on IEEE P1901, adopting OFDM modulation and demodulation technology, and conforming to the European Union's EN-50561 standard specification. It uses the existing power lines or slip contact cord as the information transmission medium for high-speed and long-distance transmission of data, and has the features of high communication rate, bi-directional transparent transmission, good stability of transmission, and strong scalability.

The KS710LD Broadband Powerline Communication Device is equipped with Dual Ethernet Ports, allowing it to connect two network devices simultaneously. This effectively expands single-point access capacity and facilitates flexible networking for various on-site equipment such as cameras, sensors, and controllers.The device draws power directly from the power line while also providing a DC 12V/24W output to supply power to connected network equipment.

The Broadband Powerline Communication Device KS710LD complies with industrial-grade standards. It supports carrier communication over AC 100V~220V power lines, achieving a maximum transmission distance of 500 meters.The device features automatic networking and route optimization capabilities, allowing for the flexible construction of various network topologies, including bus, star, tree, and hybrid types.An integrated coupling circuit provides high-voltage isolation and surge protection, ensuring stable communication and equipment safety.

The KS710LD Broadband Powerline Communication Device utilizes existing power lines for carrier communication, eliminating the need for additional cabling and greatly simplifying network deployment. It is a reliable, efficient, and easy-to-deploy powerline communication solution, particularly suited for on-site environments requiring centralized access of multiple devices or cascaded deployment. Typical applications include various industrial scenarios such as elevator video surveillance, railway communication monitoring, mine monitoring, security systems, and factory video surveillance.

Technical data

Classification

Technical indicators

Power supply port

AC100-220V

PLC Signal port

AC100-220V power line,slip touch cord,slip ring cable etc

DC Power Output

DC Power Output: 12V/24W

Modulation type

OFDM modulation type

Carrier frequency

2~28 MHz

Network Interface

2 x Standard RJ45 Ports (Dual LAN)

Ethernet bandwidth

10M/100Mbps self-adaption

Transmission distance

Power line point-to-point 500 meter,  coaxial cable 2-3 kilometer

Data delay

Within 10ms

Packet loss probability

Less than 0.1‰

Overall power consumption

≤3W

Standard agreement

TCP/IP,UDP,Profinet,Home Plug,Modbus-TCP,

IEEE 802.3,IEEE 802.3U,IEEE 802.3ab,IEEE 1905.1,IEEE 1900,IEEE 1901etc

Way of encryption

AES-128bit

Multicast

Support IGMP multicast protocols,the maximum number of nodes is 128

Exterior dimensions

Size:114*98*35.2mm (L*W*H)

Weight:330g

Mounting: Bracket Mounting Type

Environmental requirement

Operating temperature:-40℃~85℃

Operating humidity:20%-95%(non-condensable)

Storage temperature:-40℃~85℃

Working time

Industrial grade, supports 7*24 hours all-weather work

About Us
ASY Electronics (JiaXing) Co.,Ltd.
ASY Electronics (JiaXing) Co.,Ltd.

ASY Electronics is a high-tech enterprise specializing in the industrial Internet of Things (IoT), dedicated to building a data-driven, highly collaborative, and future-oriented smart factory. With "data sensing" and "intelligent connectivity" as our core capabilities, we provide manufacturing enterprises with integrated solutions—from equipment condition monitoring and refined energy management to production process optimization—through our independently developed edge-layer hardware and data integration solutions. We empower enterprises to achieve digital and intelligent transformation.

Certificate Of Honor
  • Honour
  • Honour
  • Honour
  • Honour
  • Honour
  • Honour
  • Honour
  • Honour
News
  • ASY Electronics is a high-tech enterprise specializing in the industrial Internet of Things (IoT), dedicated to building a data-driven, highly collaborative, and future-oriented smart factory. With "d...

    READ MORE
  • ASY Electronics is a high-tech enterprise specializing in the industrial Internet of Things (IoT), dedicated to building a data-driven, highly collaborative, and future-oriented smart factory. With "d...

    READ MORE
  • ASY Electronics is a high-tech enterprise specializing in the industrial Internet of Things (IoT), dedicated to building a data-driven, highly collaborative, and future-oriented smart factory. With "d...

    READ MORE
  • ASY Electronics is a high-tech enterprise specializing in the industrial Internet of Things (IoT), dedicated to building a data-driven, highly collaborative, and future-oriented smart factory. With "d...

    READ MORE